WATER DISTRIBUTION PROGRAM
Introduction
The Water Distribution Program at Hartnell College consists of twelve training modules.
Training focuses on developing new and existing water distribution operators with
the knowledge and skills required to operate and maintain water systems effectively
Participants will gain valuable information to enhance their operational skills,
making them more effective at their job or ready to obtain State of California
Water Distribution Certificates. This program is also CWEA certified for
current employees who wish to improve their current certification level o
r maintain their required contact hours.
September 8–December 1, Mondays Meets in CAB311
No Class November 10
6:00–9:00 p.m. $38 per module
Take all Twelve Modules for just $395
Register for #9073
______________________________________________________
COURSE MODULES
Module One: The Water Distribution Operator
Sept. 8 M
6–9 p.m.
#9074 $225
CAB311
______________________________________________________
Module Two: Storage Facilities
Sept. 15 M
6–9 p.m.
#9075 $225
CAB311
____________________________________________________________________
Module Three: Water Transmission Systems
Sept. 22 M
6–9 p.m.
#9076 $225
CAB311
___________________________________________________________________
Module Four: Water Mains and Appurtenances
Sept. 29 M
6–9 p.m.
#9077 $225
CAB311
__________________________________________________________________
Module Five: Working in Traffic
Oct. 6 M
6–9 p.m.
#9078 $225
CAB311
__________________________________________________________________
Module Six: Pipe Installation
Pipe laying and jointing
Oct. 13 M
6–9 p.m.
#9079 $225
CAB311
__________________________________________________________________
Module Seven: Water Quality in Distribution Systems
Oct.20 M
6–9 p.m.
#9080 $225
CAB311
_________________________________________________________________
Module Eight: Valves & Meters
Oct. 27 M
6–9 p.m.
#9081 $225
CAB311
________________________________________________________________
Module Nine: Disinfection Part 1
Nov. 3 M
6–9 p.m.
#9082 $225
CAB311
________________________________________________________________
Module Ten: Disinfection Part 2
Nov. 17 M
6–9 p.m.
#9083 $225
CAB311
________________________________________________________________
Module Eleven: Distribution System Administration
Nov. 24 M
6–9 p.m.
#9084 $225
CAB31
_________________________________________________________________
Module Twelve: Safety
Importance of safety
Dec. 1 M
6–9 p.m.
#9085 $225
CAB31
________________________________________________________________________________________
Basic Math for Water Treatment Operations Combo
Sept. 25-Oct. 30 6Thur.
6–9 p.m.
#9150 $225
Room CAB267
______________________________________________________________________
Basic Math for Water Treatment Operations
COURSE MODULES: $42 each
Module One: Basic Math for Water Treatment
Sept. 25 Thur.
6–9 p.m.
#9151 $42
Room CAB267
______________________________________________________________________
Module Two: Basic Geometry for Water Treatment
Oct. 2 Thur.
6–9 p.m.
#9152 $42
Room CAB267
______________________________________________________________________
Module Three: Distribution Math Problems
Oct. 9 Thur.
6–9 p.m.
#9153 $42
Room CAB267
______________________________________________________________________
Module Four: Math of Coagulation & Flocculation
Oct. 16 Thur.
6–9 p.m.
#9154 $42
Room CAB267
______________________________________________________________________
Module Five: Math Filtration
Oct. 23 Thur.
6–9 p.m.
#9155 $42
Room CAB267
______________________________________________________________________
Module Six: Math of Chemicals
Oct. 30 Thur.
6–9 p.m.
#9156 $42
Room CAB267
____________________________________________________________________
Distribution Math 1
Participants will learn the basic principles for solving problems
in Distribution Systems utilized in the Water industries.
Topics include:
• Area and Volume calculations
• Conversions and Chemical dosages
• Flow and velocity calculations
• Flushing Formulas
Ed Waggoner
Oct. 2-30
5 Thur.
6–9 p.m.
#9086 $148
Room CAB319
______________________________________________________________________
Distribution Math 2
Participants will learn the advanced principles for solving problems
in Distribution Systems utilized in the Water industries.
Topics include:
• Trench Area and Volume calculations
• Detention Times
• Flow and velocity calculations in service lines
• Chlorine Chemical Dosages
Ed Waggoner
Nov. 6 - Dec. 11
5 Thur.
6–9 p.m.
#9087
$148
CAB319
No class on 11/27/08
___________________________________________________________________
Distribution Math Combo
Take Distribution Math 1 & Distribution Math 2
Oct. 2- Dec.11, 2008 10 Tue. 6-9 p.m.
#9088 $265 Room CAB319
______________________________________________________________________
Backflow Prevention Testing Program
Our new Backflow Testing Program is a 40-hour
course designed to prepare students for the AWWA
Backflow Prevention Assembly General Tester examination
. Training will include exerts from the USC Cross Connection
Control Manual, videos, and exposure to all types of backflow
prevention assemblies for practical, hands-on experience
in preparation for testing.
Students interested in an AWWA certificate must
attend a minimum of 40 hours.
Students will have the opportunity to take the
AWWA General Testers examination at
the conclusion of the course for an additional $60.
Classes will be held at the Municipal Service
Center at 320 Harvest Dr. in Watsonville .
For directions, please call 755-6800.
Mike Wolf
*No class on Nov. 26, 2008
Oct. 28- Dec. 17, 2008 Tue & Wed. 6:00–9:00 p.m.
#9149 $495 Municipal Service
